Ever since the Invisible Salamanders paper was published, there has been a quiet renaissance within my friends and colleagues in applied cryptography for studying systems that use Authenticated Encryption with Associated Data (AEAD) constructions, understanding what implicit assumptions these systems make about the guarantees of the AEAD mode they chose to build upon, and the consequences of those assumptions being false.
I’ve discussed Invisible Salamanders several times throughout this blog, from my criticisms of AES-GCM and XMPP + OMEMO to my vulnerability disclosures in Threema.
Five years after Invisible Salamanders, it’s become clear to me that many software developers do not fully appreciate the underlying problem discussed in the Invisible Salamanders paper, even when I share trivial proof-of-concept exploits.
Background
Fast AEAD constructions based on polynomial MACs, such as AES-GCM and ChaCha20-Poly1305, were designed to provide confidentiality and integrity for the plaintext data, and optionally integrity for some additional associated data, in systems where both parties already negotiated one shared symmetric key.
The integrity goals of the systems that adopted these AEAD constructions were often accompanied by performance goals–usually to prevent Denial of Service (DoS) attacks in networking protocols. Verification needed to be very fast and consume minimal resources.
In this sense, AEAD constructions were an incredible success. So successful, in fact, that most cryptographers urge application developers to use one of the fast AEAD modes as the default suggestion without looking deeper at the problem being solved. This is a good thing, because most developers will choose something stupid like ECB mode in the absence of guidance from cryptographers, and AEAD modes are much, much safer than any hand-rolled block cipher modes.
The problem is, that one tiny little assumption that both parties (sender, recipient) for a communication have agreed on exactly one symmetric key for use in the protocol.
Fast MACs Are Not Key-Committing
Cryptographers have concluded that AEAD constructions based on polynomial MACs–while great for performance and rejection of malformed packets without creating DoS risks–tend to make the same assumption. This is even true of misuse-resistant modes like AES-GCM-SIV and extended-nonce constructions like XSalsa20-Poly1305.
When discussing this implicit assumption of only one valid key in the systems that use these AEAD modes, we say that the modes are not key-committing. This terminology is based on what happens when this assumption is false.
Consequently, you can take a single, specially crafted ciphertext (with an authentication tag) and decrypt it under multiple different keys. The authentication tags will be valid for all keys, and the plaintext will be different.
What does this look like in practice?
Consider my GCM exploit, which was written to generate puzzle ciphertexts for the DEFCON Furs badge challenge a few years ago. How it works is conceptually simple (although the actual mechanics behind step 4 is a bit technical):
- Generate two keys.
There’s nothing special about these keys, or their relationship to each other, and can be totally random. They just can’t be identical or the exploit is kind of pointless. - Encrypt some blocks of plaintext with key1.
- Encrypt some more blocks of plaintext with key2.
- Calculate a collision block from the ciphertext in the previous two steps–which is just a bit of polynomial arithmetic in GF(2^128)
- Return the ciphertext (steps 2, 3, 4) and authentication tag calculated over them (which will collide for both keys).
A system that decrypts the output of this exploit under key1 will see some plaintext, followed by some garbage, followed by 1 final block of garbage.
If the same system decrypts under key2, it will see some garbage, followed by some plaintext, followed by 1 final block of garbage.
For many file formats, this garbage isn’t really a problem. Additionally, a bit more precomputation allows you to choose garbage that will be more advantageous to ensuring both outputs are accepted as “valid” by the target system.
For example, choosing two keys and a targeted nonce may allow both the valid plaintext and garbage blocks to begin with a PDF file header.
If you’re familiar with the file polyglot work of Ange Albertini, you can use this to turn the Invisible Salamanders problem into an artform.
And this is just the simple attack!
The Invisible Salamanders paper outlined a more advanced variant (with a proof of concept) in Section 3.2, which doesn’t suffer from nearly as much garbage data as the simple attack.
As Bruce Schneier often says, “Attacks only get better, they never get worse.”
Why is it called Invisible Salamanders?
The proof-of-concept used in the paper involved sending one picture (of a salamander) over an end-to-end encrypted messaging app, but when the recipient flagged it as abusive, the moderator saw a different picture.
https://www.youtube.com/watch?v=3M1jIO-jLHI
Thus, the salamander was invisible to the moderators of the encrypted messaging app.
As for the choice of a “salamander”, I’ve been told by friends familiar with the research that was inspired by the original name of the Signal Protocol being “Axolotl”.
But, like, who cares about these details besides me? It’s a cute and memorable name.
What are the consequences of violating the “one key” assumption?
That depends entirely on what your system does!
In Database Cryptography Fur the Rest of Us, I discussed the use of AEAD modes to prevent confused deputy attacks. This works great, but if you’re building an application that supports multi-tenancy, you suddenly have to care about this issue again.
An earlier design for OPAQUE, a password authenticated key exchange algorithm, was broken by a partitioning oracle attack due to building atop AEAD modes that are not key-committing. This let an attacker recover passwords from Shadowsocks proxy servers with a complexity similar to a binary search algorithm.
These are two very different impacts from the same weakness, which I believe is a significant factor for why the Invisible Salamanders issue isn’t more widely understood.
Sometimes violating the “one key” assumption that went into fast AEAD modes based on Polynomial MACs completely destroys the security of your system.
Other times, it opens the door for a high-complexity but low-impact behavior that simply violates the principle of least astonishment but doesn’t buy the attacker anything useful.
They Just Don’t Get It
The Invisible Salamanders issue is relevant in any system that uses symmetric-key encryption where more than one key can be valid.
This includes, but is not limited to:
- Multi-tenant data warehouses
- Group messaging protocols
- It’s sometimes tempting to discount group messaging as a relevant consideration if your experience is “emulated groups atop 1-to-1 messaging”, but there are protocols that establish a Group Key (i.e., RFC 9420) and then use that for all group messages.
- Envelope encryption schemes with multiple wrapping keys
- Bearer tokens (such as JSON Web Tokens) in systems that utilize Key IDs
Systems can mitigate this issue by introducing an explicit key commitment scheme (based on a cryptographic hash rather than a polynomial MAC) or by using a committing cipher mode (such as AES + HMAC, if done carefully).
However, most of the time, this advice falls on deaf ears whenever this concern is brought up by a cryptography engineer who’s more aware of this issue.
“Abuse reporting? We don’t have no stinking abuse reporting!”
The most common misunderstanding is, “We don’t have a report abuse feature, so this issue doesn’t affect us.”
This is because the Invisible Salamanders talk and paper focused on how it could be leveraged to defeat abuse reporting tools and bypass content moderation.
In my experience, many security teams would read the paper and conclude that it only impacts abuse reporting features and not potentially all systems that allow multiple symmetric keys in a given context.
Another Exploit Scenario
Imagine you’re building a Data Loss Prevention product that integrates with corporate file-sharing and collaboration software (e.g. ownCloud) for small and medium businesses.
One day, someone decides to ship an end-to-end encryption feature to the file-sharing software that uses AES-GCM to encrypt files, and then encrypts the keys to each recipient’s public key. This is basically the envelope encryption use-case above.
So, you dutifully update your integration to act as another “user”, whose public key must be included in all E2EE transfers, and will block download of ciphertexts it cannot decrypt OR contains sensitive information.
And this works, until an insider threat clever enough to abuse the Invisible Salamanders issue comes along.
In order for said insider threat (e.g., a senior business analyst) to leak sensitive data (e.g., anything that would be useful for illegal insider trading) to another person that shouldn’t have access to it (e.g., a store clerk that’s talking to the press), they just have to do this:
- Encrypt the data they want to exfiltrate using key1.
- Encrypt some innocuous data that won’t trigger your DLP product, using key2.
- Ensure that both messages encrypt to the same ciphertext and authentication tag.
- Give their recipient key1, give everyone else (including your DLP software) key2.
Bam! File leaked, and everyone’s none the wiser, until it’s too late. Let’s actually imagine what happens next:
A random store clerk has leaked sensitive data to the press that only a few analysts had access to.The only communication between the analyst and the store clerk is a file that was shared to all employees, using the E2EE protocol. No emails or anything else were identified.
Your DLP product didn’t identify any other communications between these two, but somehow the store clerk has the data on their desktop.
A detailed forensics analysis may eventually figure out what happened, but by then, the damage is done and your product’s reputation is irrecoverably damaged.
All because the hypothetical E2EE protocol didn’t include a key-commitment mechanism, and nobody identified this deficit in their designs.
This isn’t to endorse DLP solutions at all, but rather, to highlight one of the many ways that the Invisible Salamander issue can be used creatively by clever attackers.
“Couldn’t you do the same with steganography?”
No, the attack is very different from stego.
Stego is about hiding a message in plain sight, so that only the person that knows where/how to look can find it.
The Invisible Salamanders attack lets you send one ciphertext through a network then selectively decrypt it to one of two plaintexts, depending on which key you reveal to each participant.
In the Invisible Salamanders paper and talk, they used this to send “abusive” messages to a recipient that the moderator would not see. Thus, invisible.
In one, the message is always emitted to anyone who knows how to find it. In the other, the attacker selects which you see, even if you have mechanisms to ensure you’re seeing the same ciphertext. It’s not a subtle difference.
Mitigation Techniques
There are multiple ways to mitigate the risk of Invisible Salamanders in a cryptosystem.
- Use HMAC, or (failing that) something built atop cryptographic hash functions, rather than a Polynomial MAC.
- Use an AEAD cipher designed with multi-recipient integrity as a security goal.
- Compute a non-invertible, one-way commitment of the encryption key.
A trivial mitigation looks like this:
class SoatokExampleEncryptor { const NEW_ENCRYPT_KEY = 'myProtocol$encryptKey'; const NEW_COMMITMENT = 'myProtocol$commitment'; public function __construct(#[SensitiveParameter] private string $key) {} /** * Let's assume we're starting with a simple AES-GCM wrapper */ public function legacyEncrypt(string $plaintext, string $assocData = ''): string { $nonce = random_bytes(12); $tag = ''; $ciphertext = openssl_encrypt( $plaintext, 'aes-256-gcm', $this->key, OPENSSL_RAW_DATA, $nonce, $tag, $assocData ); return $nonce . $ciphertext . $tag; } /** * An improved function looks something like this */ public function newEncrypt(string $plaintext, string $assocData = ''): string { // Avoid birthday bound issues with 256-bits of randomness $longerNonce = random_bytes(32); // Derive a subkey and synthetic nonce $tmp = hash_hkdf('sha512', $this->key, 44, self::NEW_ENCRYPT_KEY . $longerNonce); $encKey = substr($tmp, 0, 32); $nonce = substr($tmp, 32); // New: Key commitment $commitment = hash_hkdf('sha512', $this->key, 32, self::NEW_COMMITMENT . $longerNonce); // Most of this is unchanged $tag = ''; $ciphertext = openssl_encrypt( $plaintext, 'aes-256-gcm', $encKey, OPENSSL_RAW_DATA, $nonce, $tag, $assocData ); return $longerNonce . $commitment . $ciphertext . $tag; }}
And then the decryption logic would recalculate the commitment, and compare it with the stored value, in constant-time.
It’s important that the commitment be stored with the ciphertext, rather than bundling it with the key.
(It may be worthwhile to also include the commitment in the associated data, to add a mechanism against downgrade attacks.)
The Lesson to Learn
If you’re building a network protocol that uses AEAD to encrypt data over an insecure network (e.g., WireGuard), keep up the good work.
If you’re doing anything more involved than that, at the application layer, pause for a moment and consider whether your system will ever need multiple valid symmetric keys at once.
And, if the answer is “yes”, then you should always explicitly add a key-commitment mechanism to your system design.
(Hire a cryptographer if you’re not sure how to proceed.)
In my opinion, hemming and hawing over whether there’s a significant impact to the Invisible Salamanders issue is a worse use of your time than just solving it directly.
Eventually, I expect a new generation of AEAD modes will be standardized that explicitly provide key-commitment.
When these new designs are standardized, widely supported, and sufficiently trusted by experts, feel free to update my advice to “prefer using those modes” instead.
Header art: Harubaki, CMYKat, and a photo by Brian Gratwicke. Poorly photoshopped by myself.
https://soatok.blog/2024/09/10/invisible-salamanders-are-not-what-you-think/
#AEAD #AESGCM #InvisibleSalamanders #randomKeyRobustness #symmetricCryptography
If you’re reading this wondering if you should stop using AES-GCM in some standard protocol (TLS 1.3), the short answer is “No, you’re fine”.I specialize in secure implementations of cryptography, and my years of experience in this field have led me to dislike AES-GCM.
This post is about why I dislike AES-GCM’s design, not “why AES-GCM is insecure and should be avoided”. AES-GCM is still miles above what most developers reach for when they want to encrypt (e.g. ECB mode or CBC mode). If you want a detailed comparison, read this.
To be clear: This is solely my opinion and not representative of any company or academic institution.
What is AES-GCM?
AES-GCM is an authenticated encryption mode that uses the AES block cipher in counter mode with a polynomial MAC based on Galois field multiplication.In order to explain why AES-GCM sucks, I have to first explain what I dislike about the AES block cipher. Then, I can describe why I’m filled with sadness every time I see the AES-GCM construction used.
What is AES?
The Advanced Encryption Standard (AES) is a specific subset of a block cipher called Rijndael.Rijndael’s design is based on a substitution-permutation network, which broke tradition from many block ciphers of its era (including its predecessor, DES) in not using a Feistel network.
AES only includes three flavors of Rijndael: AES-128, AES-192, and AES-256. The difference between these flavors is the size of the key and the number of rounds used, but–and this is often overlooked–not the block size.
As a block cipher, AES always operates on 128-bit (16 byte) blocks of plaintext, regardless of the key size.
This is generally considered acceptable because AES is a secure pseudorandom permutation (PRP), which means that every possible plaintext block maps directly to one ciphertext block, and thus birthday collisions are not possible. (A pseudorandom function (PRF), conversely, does have birthday bound problems.)
Why AES Sucks
Art by Khia.
Side-Channels
The biggest reason why AES sucks is that its design uses a lookup table (called an S-Box) indexed by secret data, which is inherently vulnerable to cache-timing attacks (PDF).There are workarounds for this AES vulnerability, but they either require hardware acceleration (AES-NI) or a technique called bitslicing.
The short of it is: With AES, you’re either using hardware acceleration, or you have to choose between performance and security. You cannot get fast, constant-time AES without hardware support.
Block Size
AES-128 is considered by experts to have a security level of 128 bits.Similarly, AES-192 gets certified at 192-bit security, and AES-256 gets 256-bit security.
However, the AES block size is only 128 bits!
That might not sound like a big deal, but it severely limits the constructions you can create out of AES.
Consider the case of AES-CBC, where the output of each block of encryption is combined with the next block of plaintext (using XOR). This is typically used with a random 128-bit block (called the initialization vector, or IV) for the first block.
This means you expect a collision after encrypting
(at 50% probability) blocks.
When you start getting collisions, you can break CBC mode, as this video demonstrates:
https://www.youtube.com/watch?v=v0IsYNDMV7A
This is significantly smaller than the
you expect from AES.
Post-Quantum Security?
With respect to the number of attempts needed to find the correct key, cryptographers estimate that AES-128 will have a post-quantum security level of 64 bits, AES-192 will have a post-quantum security level of 96 bits, and AES-256 will have a post-quantum security level of 128 bits.This is because Grover’s quantum search algorithm can search
unsorted items in
time, which can be used to reduce the total number of possible secrets from
to
. This effectively cuts the security level, expressed in bits, in half.
Note that this heuristic estimate is based on the number of guesses (a time factor), and doesn’t take circuit size into consideration. Grover’s algorithm also doesn’t parallelize well. The real-world security of AES may still be above 100 bits if you consider these nuances.
But remember, even AES-256 operates on 128-bit blocks.
Consequently, for AES-256, there should be approximately
Furthermore, there will be many keys that, for a constant plaintext block, will produce the same ciphertext block despite being a different key entirely. (n.b. This doesn’t mean for all plaintext/ciphertext block pairings, just some arbitrary pairing.)
Concrete example: Encrypting a plaintext block consisting of sixteen NUL bytes will yield a specific 128-bit ciphertext exactly once for each given AES-128 key. However, there are
This means it’s conceivable to accidentally construct a protocol that, despite using AES-256 safely, has a post-quantum security level on par with AES-128, which is only 64 bits.
This would not be nearly as much of a problem if AES’s block size was 256 bits.
Real-World Example: Signal
The Signal messaging app is the state-of-the-art for private communications. If you were previously using PGP and email, you should use Signal instead.Signal aims to provide private communications (text messaging, voice calls) between two mobile devices, piggybacking on your pre-existing contacts list.
Part of their operational requirements is that they must be user-friendly and secure on a wide range of Android devices, stretching all the way back to Android 4.4.
The Signal Protocol uses AES-CBC + HMAC-SHA256 for message encryption. Each message is encrypted with a different AES key (due to the Double Ratchet), which limits the practical blast radius of a cache-timing attack and makes practical exploitation difficult (since you can’t effectively replay decryption in order to leak bits about the key).
Thus, Signal’s message encryption is still secure even in the presence of vulnerable AES implementations.
Hooray for well-engineered protocols managing to actually protect users.
Art by Swizz.However, the storage service in the Signal App uses AES-GCM, and this key has to be reused in order for the encrypted storage to operate.
This means, for older phones without dedicated hardware support for AES (i.e. low-priced phones from 2013, which Signal aims to support), the risk of cache-timing attacks is still present.
This is unacceptable!
What this means is, a malicious app that can flush the CPU cache and measure timing with sufficient precision can siphon the AES-GCM key used by Signal to encrypt your storage without ever violating the security boundaries enforced by the Android operating system.
As a result of the security boundaries never being crossed, these kind of side-channel attacks would likely evade forensic analysis, and would therefore be of interest to the malware developers working for nation states.
Of course, if you’re on newer hardware (i.e. Qualcomm Snapdragon 835), you have hardware-accelerated AES available, so it’s probably a moot point.
Why AES-GCM Sucks Even More
AES-GCM is an authenticated encryption mode that also supports additional authenticated data. Cryptographers call these modes AEAD.AEAD modes are more flexible than simple block ciphers. Generally, your encryption API accepts the following:
- The plaintext message.
- The encryption key.
- A nonce (
: A number that must only be used once).
- Optional additional data which will be authenticated but not encrypted.
The output of an AEAD function is both the ciphertext and an authentication tag, which is necessary (along with the key and nonce, and optional additional data) to decrypt the plaintext.
Cryptographers almost universally recommend using AEAD modes for symmetric-key data encryption.
That being said, AES-GCM is possibly my least favorite AEAD, and I’ve got good reasons to dislike it beyond simply, “It uses AES”.
The deeper you look into AES-GCM’s design, the harder you will feel this sticker.
GHASH Brittleness
The way AES-GCM is initialized is stupid: You encrypt an all-zero block with your AES key (in ECB mode) and store it in a variable called. This value is used for authenticating all messages authenticated under that AES key, rather than for a given (key, nonce) pair.
Diagram describing Galois/Counter Mode, taken from Wikipedia.
This is often sold as an advantage: ReusingLet’s contrast AES-GCM with the other AEAD mode supported by TLS: ChaCha20-Poly1305, or ChaPoly for short.
ChaPoly uses one-time message authentication keys (derived from each key/nonce pair). If you manage to leak a Poly1305 key, the impact is limited to the messages encrypted under that (ChaCha20 key, nonce) pair.
While that’s still bad, it isn’t “decrypt all messages under that key forever” bad like with AES-GCM.
Note: “Message Authentication” here is symmetric, which only provides a property called message integrity, not sender authenticity. For the latter, you need asymmetric cryptography (wherein the ability to verify a message doesn’t imply the capability to generate a new signature), which is totally disparate from symmetric algorithms like AES or GHASH. You probably don’t need to care about this nuance right now, but it’s good to know in case you’re quizzed on it later.
H Reuse and Multi-User Security
If you recall, AES operates on 128-bit blocks even when 256-bit keys are used.If we assume AES is well-behaved, we can deduce that there are approximately
This is trivial to calculate. Simply divide the number of possible keys (
) by the number of possible block states (
Each key that will map an arbitrarily specific plaintext block to a specific ciphertext block is also separated in the keyspace by approximately
This means there are approximately
Credit: Harubaki
“Why Does This Matter?”
It means that, with keys larger than 128 bits, you can model the selection ofNote: Your 128-bit randomly generated AES keys already have this probability baked into their selection, but this specific analysis doesn’t really apply for 128-bit keys since AES is a PRP, not a PRF, so there is no “collision” risk. However, you end up at the same upper limit either way.
But 50% isn’t good enough for cryptographic security.
In most real-world systems, we target a
collision risk. So that means our safety limit is actually
different AES keys before you have to worry about
This isn’t the same thing as symmetric wear-out (where you need to re-key after a given number of encryptions to prevent nonce reuse). Rather, it means after your entire population has exhausted the safety limit of
If you have a billion users (
), the safety limit is breached after
AES keys per user (approximately 262,000).
“What Good is H Reuse for Attackers if HF differs?”
There are two numbers used in AES-GCM that are derived from the AES key.(the value of
with a counter of 0 from the following diagram) is XORed with the final result to produce the authentication tag.
The arrow highlighted with green is HF.
It’s tempting to think that a reuse of
Art by Khia.
However, it’s straightforward to go from a condition of
- Intercept multiple valid ciphertexts.
- e.g. Multiple JWTs encrypted with
{"alg":"A256GCM"}
- Use your knowledge of
- Calculate a new authentication tag for a chosen ciphertext using
While the blinding offered by XORing the final output with
Ergo, a collision in
“How Could the Designers Have Prevented This?”
The core issue here is the AES block size, again.If we were analyzing a 256-bit block variant of AES, and a congruent GCM construction built atop it, none of what I wrote in this section would apply.
However, the 128-bit block size was a design constraint enforced by NIST in the AES competition. This block size was during an era of 64-bit block ciphers (e.g. Triple-DES and Blowfish), so it was a significant improvement at the time.
NIST’s AES competition also inherited from the US government’s tradition of thinking in terms of “security levels”, which is why there are three different permitted key sizes (128, 192, or 256 bits).
“Why Isn’t This a Vulnerability?”
There’s always a significant gap in security, wherein something isn’t safe to recommend, but also isn’t susceptible to a known practical attack. This gap is important to keep systems secure, even when they aren’t on the bleeding edge of security.Using 1024-bit RSA is a good example of this: No one has yet, to my knowledge, successfully factored a 1024-bit RSA public key. However, most systems have recommended a minimum 2048-bit for years (and many recommend 3072-bit or 4096-bit today).
With AES-GCM, the expected distance between collisions in
As a user, you know that after
We don’t have that kind of distinguisher available to us today. And even if we had one available, the amount of data you need to search in order for any two users in the population to reuse/collide
Naturally, this isn’t a practical vulnerability. This is just another gripe I have with AES-GCM, as someone who has to work with cryptographic algorithms a lot.
Short Nonces
Although the AES block size is 16 bytes, AES-GCM nonces are only 12 bytes. The latter 4 bytes are dedicated to an internal counter, which is used with AES in Counter Mode to actually encrypt/decrypt messages.(Yes, you can use arbitrary length nonces with AES-GCM, but if you use nonces longer than 12 bytes, they get hashed into 12 bytes anyway, so it’s not a detail most people should concern themselves with.)
If you ask a cryptographer, “How much can I encrypt safely with AES-GCM?” you’ll get two different answers.
- Message Length Limit: AES-GCM can be used to encrypt messages up to
bytes long, under a given (key, nonce) pair.
- Number of Messages Limit: If you generate your nonces randomly, you have a 50% chance of a nonce collision after
However, 50% isn’t conservative enough for most systems, so the safety margin is usually much lower. Cryptographers generally set the key wear-out of AES-GCM atrandom nonces, which represents a collision probability of one in 4 billion.
These limits are acceptable for session keys for encryption-in-transit, but they impose serious operational limits on application-layer encryption with long-term keys.
Random Key Robustness
Before the advent of AEAD modes, cryptographers used to combine block cipher modes of operation (e.g. AES-CBC, AES-CTR) with a separate message authentication code algorithm (e.g. HMAC, CBC-MAC).You had to be careful in how you composed your protocol, lest you invite Cryptographic Doom into your life. A lot of developers screwed this up. Standardized AEAD modes promised to make life easier.
Many developers gained their intuition for authenticated encryption modes from protocols like Signal’s (which combines AES-CBC with HMAC-SHA256), and would expect AES-GCM to be a drop-in replacement.
Unfortunately, GMAC doesn’t offer the same security benefits as HMAC: Finding a different (ciphertext, HMAC key) pair that produces the same authentication tag is a hard problem, due to HMAC’s reliance on cryptographic hash functions. This makes HMAC-based constructions “message committing”, which instills Random Key Robustness.
Critically, AES-GCM doesn’t have this property. You can calculate a random (ciphertext, key) pair that collides with a given authentication tag very easily.
This fact prohibits AES-GCM from being considered for use with OPAQUE (which requires RKR), one of the upcoming password-authenticated key exchange algorithms. (Read more about them here.)
Better-Designed Algorithms
You might be thinking, “Okay random furry, if you hate AES-GCM so much, what would you propose we use instead?”
I’m glad you asked!
XChaCha20-Poly1305
For encrypting messages under a long-term key, you can’t really beat XChaCha20-Poly1305.
- ChaCha is a stream cipher based on a 512-bit ARX hash function in counter mode. ChaCha doesn’t use S-Boxes. It’s fast and constant-time without hardware acceleration.
- ChaCha20 is ChaCha with 20 rounds.
- XChaCha nonces are 24 bytes, which allows you to generate them randomly and not worry about a birthday collision until about
messages (for the same collision probability as AES-GCM).
- Poly1305 uses different 256-bit key for each (nonce, key) pair and is easier to implement in constant-time than AES-GCM.
- XChaCha20-Poly1305 uses the first 16 bytes of the nonce and the 256-bit key to generate a distinct subkey, and then employs the standard ChaCha20-Poly1305 construction used in TLS today.
For application-layer cryptography, XChaCha20-Poly1305 contains most of the properties you’d want from an authenticated mode.
However, like AES-GCM (and all other Polynomial MACs I’ve heard of), it is not message committing.
The Gimli Permutation
For lightweight cryptography (n.b. important for IoT), the Gimli permutation (e.g. employed in libhydrogen) is an attractive option.Gimli is a Round 2 candidate in NIST’s Lightweight Cryptography project. The Gimli permutation offers a lot of applications: a hash function, message authentication, encryption, etc.
Critically, it’s possible to construct a message-committing protocol out of Gimli that will hit a lot of the performance goals important to embedded systems.
Closing Remarks
Despite my personal disdain for AES-GCM, if you’re using it as intended by cryptographers, it’s good enough.Don’t throw AES-GCM out just because of my opinions. It’s very likely the best option you have.
Although I personally dislike AES and GCM, I’m still deeply appreciative of the brilliance and ingenuity that went into both designs.
My desire is for the industry to improve upon AES and GCM in future cipher designs so we can protect more people, from a wider range of threats, in more diverse protocols, at a cheaper CPU/memory/time cost.
We wouldn’t have a secure modern Internet without the work of Vincent Rijmen, Joan Daemen, John Viega, David A. McGrew, and the countless other cryptographers and security researchers who made AES-GCM possible.
Change Log
- 2021-10-26: Added section on H Reuse and Multi-User Security.
https://soatok.blog/2020/05/13/why-aes-gcm-sucks/
#AES #AESGCM #cryptography #GaloisCounterMode #opinion #SecurityGuidance #symmetricCryptography
